AccuTouch® 2210 Serial Controller (Discontinued December 2006)
Overview
The 2210 serial controller (Part # 055165-000) uses the popular EIA RS-232C serial interface for connection to a wide range of host computers. Hardware and software handshaking are supported along with packet checksums for reliable communication. The 2210 board is typically mounted inside the display enclosure. Power is sourced inside the display.
Specifications
-
Technical
Part Number(s)
055165-000
Technology
accutouch
Number of Touches
1
Response Time-total (typical)
21 ms at 9600 baud, 7 ms at 19,200 baud
Input Methods
Finger
Gloved hand
Passive stylusDimensions
3.30" x 2.10" x 0.55" / 84 mm x 53 mm x 14 mm
Overall Thickness
2.10" / 53 mm
Surface Treatment
clear
Latency
21 ms at 9600 baud, 7 ms at 19,200 baud
Output Formats
Binary or ASCII
Power Input
5 VDC / ± 10%
Baud Rate
19,200 baud
Operating Temperature
0°C to 70°C
Operating Environment
Power requirements: 5 VDC (± 10%):
Standby: 0.055 amp
Touchdown (avg.): 0.160 amp
Touchdown (peak): 0.240 ampStorage Temperature
-25°C to 85°C
Humidity
95% RH, noncondensing
MTBF
50,000 hours demonstrated
Mounting Options
Mounting hole located 0.150 (3.81 mm) horizontally and vertically inside each corner
Compatibility Mode
E261-280, E271-140, E281A-4002
Controller Cables
Contact Elo for more information.
Optional Software/Hardware Handshaking
XON/XOFF, DSR/DTR, RTS/CTS